DISCONTINUED - Weiand 7587 6-71 BLOWER KIT, SBC 8MM SATIN

Weiand
WEI7587
This is a SPECIAL ORDER part. This item can be brought in either with a stock order or on its own. Contact us today to discuss available options BEFORE ordering.
$5,761.93
$5,761.93
$5,761.93

CLEARANCE / DISCONTINUED ITEM - ALL SALES FINAL
CLEARANCE / DISCONTINUED ITEM - ALL SALES FINAL
Verify fitment with your vehicle
 More payment options
DISCONTINUED - Weiand 7587 6-71 BLOWER KIT, SBC 8MM SATIN

Vendor: Weiand

DISCONTINUED - Weiand 7587 6-71 BLOWER KIT, SBC 8MM SATIN

$5,761.93

Vendor: Weiand

DISCONTINUED - Weiand 7587 6-71 BLOWER KIT, SBC 8MM SATIN

$5,761.93
DISCONTINUED - Pro-Street SuperCharger Kit; 6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin;
A true blast form the past. These highly sought after superchargers have been unavailable for years. Weiand is proud to reintroduce them. The case of the 6-71 and 8-71 superchargers have been redesigned for a nostalgic look that will look at home on a cacklefest dragster as well as a new high end build. HORSEPOWER! - Weiand's 6-71 kits are the ultimate statement of power and looks. Pull into the local cruise-in or dragstrip with one of these sticking through the hood and you will get noticed. They're not for the meek however - these supercharger kits are designed to generate 50%+ more horsepower and torque across the rpm range! Weiand's 6-71 blower kits are equipped with exclusive two lobe rotors for maximum boost at lower RPMs. All feature a new case, end-plates, manifold and snout. Billet belt tensioner components and V-belt pulleys round out the package to give you everything necessary for installation. Kits are engineered to produce 10-12 lbs of boost on small blocks and 5-7 lbs of boost on big blocks but are a simple pulley change away from pump gas or hard core racing. All superchargers are built in Weiand's state-of-the-art manufacturing cell and each supercharger is 100% boost tested to help you squeeze out maximum power and efficiency. ** NOT compatible w/ Mercruiser, OMC or Volvo Penta accessory drives and requires short water pump and 2 V pulley. Weiand does not recommend using a supercharger with a Gilmer toothed belt and pop-off valve in an enclosed engine compartment. There is a high risk of explosion in the event of a backfire. 6-71 superchargers are perfectly suited for engines with 7.5:1 to 8:1 compression ratios but may require race gas unless pulley ratios are altered to reduce effective compression ratio below 12:1. Weiand recommends that all kits use double keyed crankshaft and double keyed, steel, SFI approved balancer. Kits include manifold, blower assembly, drive snout, pulleys, belt and hardware.
  • Long Nose
  • 3 in. Gilmer Drive Belt
  • 11.5% Underdriven Drive Ratio w/Incl. Pulley Set
  • Satin Finish
  • Instant Full Time Power Every Time You Hit The Throttle
  • Substantially Increases Torque

Application Summary:

Year Make/Model
1965-1974 Avanti II
1976-1985 Avanti II
1977-1981 Buick Century
1978 Buick LeSabre
1982 Buick LeSabre
1977-1986 Buick Regal
1977-1979 Buick Skylark
1966-1974 Checker Aerobus
1969-1970 Checker Deluxe
1965-1982 Checker Marathon
1969-1974 Checker Taxicab
1959 Chevrolet 3B
1959 Chevrolet 3C
1959 Chevrolet 3D
1959 Chevrolet 3E
1959 Chevrolet 3F
1959 Chevrolet 3G
1955-1975 Chevrolet Bel Air
1981 Chevrolet Bel Air
1958-1972 Chevrolet Biscayne
1969-1974 Chevrolet Blazer
1958-1961 Chevrolet Brookwood
1969-1972 Chevrolet Brookwood
1975-1986 Chevrolet C10
1960-1974 Chevrolet C10 Pickup
1967-1986 Chevrolet C10 Suburban
1975-1986 Chevrolet C20
1960-1974 Chevrolet C20 Pickup
1967-1986 Chevrolet C20 Suburban
1975-1986 Chevrolet C30
1960-1974 Chevrolet C30 Pickup
1960-1962 Chevrolet C40
1967-1986 Chevrolet Camaro
1966-1986 Chevrolet Caprice
1964-1973 Chevrolet Chevelle
1963-1968 Chevrolet Chevy II
1955-1982 Chevrolet Corvette
1984-1986 Chevrolet Corvette
1957-1958 Chevrolet Del Ray
1959-1960 Chevrolet El Camino
1964-1986 Chevrolet El Camino
1969-1970 Chevrolet Estate
1975-1986 Chevrolet G10
1968-1974 Chevrolet G10 Van
1975-1986 Chevrolet G20
1967-1974 Chevrolet G20 Van
1975-1986 Chevrolet G30
1970-1974 Chevrolet G30 Van
1958-1985 Chevrolet Impala
1975-1986 Chevrolet K10
1960-1974 Chevrolet K10 Pickup
1967-1986 Chevrolet K10 Suburban
1975-1986 Chevrolet K20
1967 Chevrolet K20 Panel
1960-1974 Chevrolet K20 Pickup
1967-1986 Chevrolet K20 Suburban
1977-1986 Chevrolet K30
1968-1974 Chevrolet K30 Pickup
1975-1986 Chevrolet K5 Blazer
1959-1961 Chevrolet Kingswood
1969-1972 Chevrolet Kingswood
1973-1976 Chevrolet Laguna
1964-1967 Chevrolet Malibu
1973-1983 Chevrolet Malibu
1970-1986 Chevrolet Monte Carlo
1975-1979 Chevrolet Monza
1955-1961 Chevrolet Nomad
1969-1979 Chevrolet Nova
1955-1957 Chevrolet One-Fifty Series
1959-1961 Chevrolet Parkwood
1955-1958 Chevrolet Sedan Delivery
1955-1966 Chevrolet Suburban
Year
Make
Model
Engine
Notes
1965 - 1972, 1981 - 1985
Avanti
II
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1973 - 1974, 1976 - 1980
Avanti
II
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Non-Stocked Item - Built To Order; Allow A Few Days To Ship
1981 - 1985
Avanti
II
5.0L
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1965 - 1969
Avanti
II
5.3L
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1969 - 1972
Avanti
II
5.7L
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1977 - 1980
Avanti
II
5.7L
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Non-Stocked Item - Built To Order; Allow A Few Days To Ship
1973
Avanti
II
6.6L
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1973 - 1974, 1976
Avanti
II
6.6L
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Non-Stocked Item - Built To Order; Allow A Few Days To Ship
1977 - 1981
Buick
Century
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1981
Buick
Century
4.4L
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1977 - 1981
Buick
Century
5.0L
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1977 - 1979
Buick
Century
5.7L
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1978, 1982
Buick
LeSabre
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1982
Buick
LeSabre
4.4L
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1978
Buick
LeSabre
5.0L
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1977 - 1986
Buick
Regal
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1981 - 1982
Buick
Regal
4.4L
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1977 - 1980, 1982 - 1986
Buick
Regal
5.0L
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor
1977
Buick
Regal
5.7L
6-71 Blower; Long Nose; 3in. Gilmer Drive Belt; 8mm Pitch; Incl. Supercharger/Intake Manifold/Belt/Upper-Lower D Pulley/Belt Idler/Gaskets/Hdw; Satin
Consultation w/Tech Rep May Be Necessary~Double Keyed Crankshaft and SFI Approved Balancer Recommended~For Use w/One Or Two V-Belt Accessory Pulley Crankshafts~Gilmer Toothed Belt w/Pop Off Valve In Enclosed Compart. Not Recommended~May Req. RaceGas Unless PullyRatio Altered To Reduce Comp. Ratio Below 12:1~Non-Stocked Item - Built To Order; Allow A Few Days To Ship~Not Compatible w/Mericruiser/OMC/Volvo Penta Accessory Drives~Requires Short Water Pump and 2V Pulley~Requires Short Water Pump And Accessory Brackets For Install~Requires Small Cap Distributor