{"product_id":"hftd-315054030","title":"PPE Diesel 20-25 Ford 6.7L Power Stroke Zilla Intake Manifold and Turbo Inlet Kit-Polished  315054030","description":"\u003ch1\u003ePPE Diesel Performance - 20-25 Ford 6.7L Power Stroke Zilla Intake Manifold and Turbo Inlet Kit-Polished \u003c\/h1\u003e\u003ch3\u003e315054030\u003c\/h3\u003e\u003cp\u003eThe stock cast aluminum intake bridge manifold on the Ford 6.7L Power Stroke is a well-known performance bottleneck. Certain design characteristics of the stock manifold restrict fresh air intake, which is particularly unfavorable for engine performance. Some sections of the stock manifold’s internal passage are even narrower than a 2.5-inch-diameter tube, severely limiting airflow.\u003c\/p\u003e\n\u003cp\u003eAdditionally, the EGR inlet swirl is positioned directly in the center of the flow path, creating significant turbulence and flow disruption. This turbulence reduces both the intake air velocity and the volume of air entering the cylinder heads.\u003c\/p\u003e\n\u003cp\u003eThe PPE Performance Intake Manifold effectively eliminates these stock bottlenecks by utilizing large 3.25-inch stainless steel tubing, combined with hydroformed runners that seamlessly direct airflow into both cylinder heads. The problematic, flow-restricting EGR boss has been eliminated, creating unobstructed flow passages.\u003c\/p\u003e\n\u003cp\u003eFurthermore, the EGR inlet port has been carefully repositioned and angled to ensure even distribution of fresh air and EGR gases to both banks, thereby maximizing volumetric efficiency. To support this, the kit includes a redesigned stainless steel EGR pipe and gaskets. With these enhancements, the PPE Performance Intake Manifold achieves a 69 percent higher maximum flow rate than the stock component.\u003c\/p\u003e\n\u003cp\u003eOn the turbo inlet side, the system features a four-inch stainless steel turbo inlet, paired with a dry-carbon-fiber airbox duct. Unlike the stock components, which transition from circular shape to oval shape and then back to circular shape, both PPE components maintain a fully round design.\u003c\/p\u003e\n\u003cp\u003eThis ensures higher flow efficiency and reduces frictional losses. Additionally, the factory plastic two-chamber turbo resonator has been removed, reducing air turbulence and weight, while enhancing turbo sound.\u003c\/p\u003e\n\u003cp\u003eThe best part of this kit is its hassle-free installation and OEM-like fitment. All stock mounting points - including sensor clips, dipstick brackets, and coolant hose connections - are retained. Not a single wiring harness or coolant line is left unsupported. The MAP sensor port is positioned in the exact same location as the stock manifold, with MAP sensor shield provisions.\u003c\/p\u003e\n\u003cp\u003eUpgrade today and get the most out of your Power Stroke.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e For 6.7L High-Output applications, PPE Turbo Coolant Lines Relocation Kit (SKU 319010000, available separately) is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM P\/N for reference: Ford LC3Z9424B\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge 3.25-inch stainless steel tubing and hydroformed runners for increased airflow\u003c\/li\u003e\n\u003cli\u003eEliminate stock restrictive EGR inlet swirl\u003c\/li\u003e\n\u003cli\u003e69 percent higher maximum flow rate than the stock component\u003c\/li\u003e\n\u003cli\u003eHandles higher boost pressures - consistent performance for any application\u003c\/li\u003e\n\u003cli\u003eRedesigned stainless steel EGR pipe and gaskets\u003c\/li\u003e\n\u003cli\u003eFully round 4-inch stainless-steel turbo inlet\u003c\/li\u003e\n\u003cli\u003eFully round airbox duct made of 100 percent dry carbon fiber for unrestricted airflow and reduced weight\u003c\/li\u003e\n\u003cli\u003eRemoves the factory two-chamber plastic intake resonator\u003c\/li\u003e\n\u003cli\u003eLower manifold gaskets and EGR pipe gaskets included\u003c\/li\u003e\n\u003cli\u003e5-ply silicone couplers with oil resistant inner layer\u003c\/li\u003e\n\u003cli\u003eOEM-like fitment, retains all stock mounting points\u003c\/li\u003e\n\u003cli\u003eCompatible with regular-output and 500 hp high-output trucks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PPE Diesel","offers":[{"title":"Default Title","offer_id":43916778111115,"sku":"PPE315054030","price":2442.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/5495\/7707\/files\/ppe315054030-ppe-diesel-20-25-ford-67l-power-stroke-zilla-intake-manifold-and-turbo-inlet-kit-polished-315054030.jpg?v=1756932866","url":"https:\/\/jbspowercentre.com\/products\/hftd-315054030","provider":"JBs Power Centre","version":"1.0","type":"link"}