Special Order
This 10 Inch Drag Race Converter for '67-'87 Torqueflite 727 provides roughly 3800-4500 stall.
TCI 9", 10" and 11" Drag Race Torque Converters can be run in applications with up to 750 horsepower and are most commonly used for a bracket race or street/strip application that leans more toward the "strip." Stall speeds vary depending on application but the average is 3800-4500 RPM for 9" and 10" converters and 3000 RPM for the 11" version. Furnace-brazed and reinforced fins increase durability. Needle bearings reduce drag and increase thrust capacity. Three sets of Torrington bearings replace normal thrust washers used in OEM and some aftermarket converters to triple the thrust capacity capabilities. Hardened steel pump hubs increase strength, durability and longevity while decreasing wear. Increased strength and holding capacity of high load sprags ensure stator stays locked when converter stalls and guarantees converter will stall correctly run after run. Ballooning plates (9" and 10" only) double strength of converter when using transbrake and/or power adders. 360 Degree Mounting Ring.
TCI 9", 10" and 11" Drag Race Torque Converters can be run in applications with up to 750 horsepower and are most commonly used for a bracket race or street/strip application that leans more toward the "strip." Stall speeds vary depending on application but the average is 3800-4500 RPM for 9" and 10" converters and 3000 RPM for the 11" version. Furnace-brazed and reinforced fins increase durability. Needle bearings reduce drag and increase thrust capacity. Three sets of Torrington bearings replace normal thrust washers used in OEM and some aftermarket converters to triple the thrust capacity capabilities. Hardened steel pump hubs increase strength, durability and longevity while decreasing wear. Increased strength and holding capacity of high load sprags ensure stator stays locked when converter stalls and guarantees converter will stall correctly run after run. Ballooning plates (9" and 10" only) double strength of converter when using transbrake and/or power adders. 360 Degree Mounting Ring.
Application Summary:
| Year | Make/Model |
|---|---|
| 1974 | AM General DJ5 |
| 1974 | AM General FJ8 |
| 1978-1980 | American Motors AMX |
| 1978-1983 | American Motors Concord |
| 1975-1978 | American Motors Gremlin |
| 1973-1977 | American Motors Hornet |
| 1971-1974 | American Motors Javelin |
| 1971-1978 | American Motors Matador |
| 1975-1980 | American Motors Pacer |
| 1979-1982 | American Motors Spirit |
| 1971 | Aston Martin DBS |
| 1977-1989 | Aston Martin Lagonda |
| 1972-1989 | Aston Martin V-8 |
| 1972-1974 | Aston Martin Vantage |
| 1987-1988 | Aston Martin Zagato |
| 1962-1971 | Chrysler 300 |
| 1962-1967 | Chrysler Imperial |
| 1962-1974 | Chrysler New Yorker |
| 1962-1971 | Chrysler Newport |
| 1973-1974 | Chrysler Newport |
| 1962-1963 | Dodge 880 |
| 1965 | Dodge 880 |
| 1967-1969 | Dodge A100 Pickup |
| 1971-1974 | Dodge B100 Van |
| 1971-1974 | Dodge B200 Van |
| 1971-1974 | Dodge B300 Van |
| 1973-1974 | Dodge CB300 |
| 1970-1974 | Dodge Challenger |
| 1966-1974 | Dodge Charger |
| 1965-1967 | Dodge Coronet |
| 1970-1974 | Dodge Coronet |
| 1985-1989 | Dodge D100 |
| 1968-1974 | Dodge D100 Pickup |
| 1962-1967 | Dodge D100 Series |
| 1968-1974 | Dodge D200 Pickup |
| 1962-1967 | Dodge D200 Series |
| 1968-1974 | Dodge D300 Pickup |
| 1962-1967 | Dodge D300 Series |
| 1962-1974 | Dodge Dart |
| 1962 | Dodge Lancer |
| 1969-1974 | Dodge M300 |
| 1965-1974 | Dodge Monaco |
| 1962-1964 | Dodge P100 |
| 1962-1964 | Dodge P200 |
| 1971-1972 | Dodge P200 |
| 1962-1964 | Dodge P300 |
| 1971-1972 | Dodge P300 |
| 1962-1973 | Dodge Polara |
| 1973 | Dodge R300 |
| 1974 | Dodge Ramcharger |
| 1971 | Dodge RM300 |
| 1973-1974 | Dodge RM300 |
| 1971 | Dodge RM350 |
| 1974 | Dodge RM350 |
| 1968-1974 | Dodge W100 Pickup |
| 1962-1967 | Dodge W100 Series |
| 1968-1974 | Dodge W200 Pickup |
| 1962-1967 | Dodge W200 Series |
| 1968-1974 | Dodge W300 Pickup |
| 1962-1967 | Dodge W300 Series |
| 1962 | Facel Vega Excellence |
| 1974 | International 100 |
| 1972-1973 | International 1010 |
| 1972-1973 | International 1110 |
| 1972-1973 | International 1210 |
| 1972-1973 | International 1310 |
| 1973 | International 1310M |
| 1974-1975 | International 150 |
| 1974-1975 | International 200 |
| 1972 | International M1100 |
| 1972 | International M1200 |
| 1965-1967 | International M1400 |
| 1975 | International MS |
| 1973-1974 | International MS1210 |