Permatex,MULTI,PURPOSE,GASKET,51850

Permatex
PER51850
This is a SPECIAL ORDER part. This item can be brought in either with a stock order or on its own. Contact us today to discuss available options BEFORE ordering.
$26.11
$26.11
$26.11

Permatex,MULTI,PURPOSE,GASKET,51850

Vendor: Permatex

Permatex,MULTI,PURPOSE,GASKET,51850

$26.11

Vendor: Permatex

Permatex,MULTI,PURPOSE,GASKET,51850

$26.11

Permatex Anaerobic Gasket Maker 518 for Aluminum Parts, 50ml Tube

51850


Details:

OEM specified. Noncorrosive gasketing material designed primarily for use on aluminum, iron, and steel flanged mating surfaces. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable. Fills gaps up to .015″ and cures to a solvent-resistant seal that will not tear or decay during service. Parts disassemble easily even after extended service. Old gasket material can be removed in minutes with a simple putty knife.

Application:

Automobile

Suggested Applications:For use on machined aluminum metal components; transmission pans, transmission case covers, transaxle casings, transfer cases, split crankcases, pumps, and housings.

Motorcycle

Suggested Applications:Suggested For use on machined aluminum metal components; transmission pans, transmission case covers, transaxle casings, axle covers, gear cases, split crankcases, pumps, housings, and with oring replacement.

Heavy Duty

Suggested Applications:Case covers, power divider shaft housings, input/output power shafts, PTO covers to housing, cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges

Marine

Suggested Applications:Crank case flanges drive unit joints, and with o-ring replacement

Instruction:

TO MAKE A GASKET:

  1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
  2. Spray Permatex®Surface Prep™activator on one surface only. Allow to dry 1-2 minutes.
  3. Apply a continuous bead of sealant to the unprimed surface.
  4. Assemble mating surfaces with minimal lateral movement. Excess sealant can be wiped awaywith a cloth and shop solvent.

TO DRESS A GASKET:

  1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
  2. Spray Permatex®Surface Prep™activator to both flange surfaces. Allow to dry 1-2 minutes.
  3. Completely cover both sides of the precut gasket with sealant.
  4. Place coated gasket on flange, and assemble mating surfaces with minimal lateral movement.