KBS Coatings DiamondFinish Clear Coat - Aerosol (Gloss)
SKU: KBS8114
DiamondFinish Clear is a crazy tough Clear Coat that can be applied directly to Metal or over other coatings. DiamondFinish Clear is a water-clear, high-gloss, clear coat that remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking, or peeling.
- Formulated to Apply Directly Over Other Coatings or Direct To Metal (DTM)!
- Permanent high solids (over 60%) and low VOC's Clear Coat.
- Ideal for Direct To Metal (DTM) applications - No Additives Needed!
- A Moisture Cured Urethane, which is an advanced coatings technology offering durability, flexibility, corrosion, and chemical resistance.
- Apply directly to Painted Surfaces with Minimal Surface Prep.
- Incredibly tough and hard like no other clear coat on the market.
- The water-clear, high-gloss clear coat remains permanently flexible and can perform in the toughest environments without yellowing, cracking, or peeling.
- Exterior grade UV Stable Clear Coat. DiamondFinish Clear is not affected by sunlight. Does not chalk, yellow, or fade.
- It can be applied with a brush (without leaving any brush marks), roller, and conventional spray gun.
- Extremely easy to wet sand, cut, buff, and polish to create a deep mirror finish.
- Unlike normal two-part (2K) coatings, no hardener is needed. You can just stir well and go. DiamondFinish ClearCoat will cure without heat or UV lights in temperatures from 50° to 86° Fahrenheit.
- It can be applied directly to a cured Automotive basecoat, Standard solid color paints, and single-part (1K) or two-part (2K) paints. It can be applied to Ferrous Metals such as mild steel, carbon steel, stainless steel, cast iron, and wrought iron. It can also be applied to Non-Ferrous metals, including Aluminum, Alloys, Brass, Chrome, and Copper.
- Able to withstand the harshest of chemicals including fuels, solvents, Battery acid, Brake fluid, Ethanol, Methanol, MEK, Hydrochloric Acid, Fertilizers, and Acetone.
- Graffiti Resistant: Because of its chemical resistance, graffiti just won't stick and can be removed simply with a solvent-soaked rag.
- Great for high-temperature automotive applications, including the use on cylinder heads, engine blocks, brake components, and even inlet manifolds, without yellowing up to 300° Fahrenheit.
- Over 60% Solids, which Means Ultra Durability
- Direct To Metal Application - No Additives Needed
- Ideal Clear Coat for Fiberglass Surface and Carbon Fiber Surfaces.
- Apply Directly to Painted Surfaces
- Single Part Formula
- Tougher, Harder, and Easier To Use than 2-Part (2K) Clear Coats
- Seals and Coats both Paints & Metals
- Self Leveling (No Brush Marks)
- Simple Brush, Spray, or Roll Application
- Wet sand, cut, buff, and polish to create a deep mirror finish.
- Permanent UV Stability - Does Not Yellow or Fade
- High Chemical Resistance (including some fuels)
- High Temperature resistance (300F) suitable for Motors and Brake Calipers
- Once fully cured, DiamondFinish Clear is 100% non-toxic.
- Graffiti Proof
- Re-coat in 1-2 hours
- Seals for Ferrous and Non-Ferrous metals
- Shelf Life: At least 2 years when unopened from the date of purchase. After opening, when the directions for use and storage are followed, it is typically 6 months.
- Protecting steel and plastic bumpers paint work.
- Ideal for clear coating Fishing Lures and Crankbaits
- Automotive aluminum fitting, fuel tanks, and parts.
- Protecting existing paintwork from physical damage.
- Stopping chemical attack from acids and alkalis on existing paint work.
- Protecting paint work from all fuels.
- Ideal for clear coating Tumblers.
- Ideal for clear coating custom Coasters.
- Used by Boaters to Revitalize Clear Coat on Fiberglass Boats - Boat Bottoms and Boat Topsides.
- Excellent Clear Coat to Clear Coat Aluminum John Boats.
- Graffiti Protection.
- Custom Automotive Refinish.
- Marine internal and external Refinish.
