KBS Coatings DiamondFinish Clear - Quart 8404
8404
DiamondFinish Clear is a crazy tough Clear Coat that can be applied Direct To Metal or over other coatings. DiamondFinish Clear is a water clear high gloss clear coat that remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.
- Formulated to Apply Directly Over Other Coatings or Direct To Metal (DTM)!
- Permanent high solids (over 60%) and low VOC's Clear Coat.
- Ideal for Direct To Metal (DTM) applications - No Additives Needed!
- A Moisture Cured Urethane which is an advanced coatings technology offering durability, flexibility, corrosion, and chemical resistance.
- Apply directly to Painted Surfaces with Minimal Surface Prep.
- Incredibly tough and hard like no other clear coat on the market.
- Water clear high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.
- Exterior grade UV Stable Clear Coat. DiamondFinish Clear is not affected by sunlight. Does not chalk, yellow, or fade.
- Can be applied with a brush (without leaving any brush marks), roller and conventional spray gun.
- Extremely easy to wet sand, cut, buff, and polish to create a deep mirror finish.
- Unlike normal two part (2K) coatings, no hardener is needed. You can just stir well and go. DiamondFinish ClearCoat will cure without heat or UV lights in temperatures from 50° to 86° Fahrenheit.
- Can be applied directly to a cured Automotive basecoat, Standard solid color paints, and Single Part (1K) or Two Part (2K) paints. It can be applied to Ferrous Metals such as mild steel, carbon steel, stainless steel, cast iron, and wrought iron. It can also be applied to Non-Ferrous metals including Aluminum, Alloys, Brass, Chrome, and Copper.
- Able to withstand the harshest of chemicals including fuels, solvents, Battery acid, Brake fluid, Ethanol, Methanol, MEK, Hydrochloric Acid, Fertilizers, and Acetone.
- Graffiti Resistant: because of its chemical resistance, graffiti just won't stick and can be removed simply with a solvent soaked rag.
- Great for high temperature automotive applications including the use on cylinder heads, engine blocks, brake components and even inlet manifolds, without yellowing up to 300° Fahrenheit.
- Over 60% Solids which Means Ultra Durability
- Direct To Metal Application - No Additives Needed
- Ideal Clear Coat for Fiberglass Surface and Carbon Fiber Surfaces.
- Apply Directly to Painted Surfaces
- Single Part Formula
- Tougher, Harder and Easier To Use than 2 Part (2K) Clear Coats
- Seals and Coats both Paints & Metals
- Self Leveling (No Brush Marks)
- Simple Brush, Spray or Roll Application
- Wet sand, cut, buff, and polish to create a deep mirror finish.
- Permanent UV Stability - Does Not Yellow or Fade
- High Chemical Resistance (including some fuels)
- High Temperature resistance (300F) suitable for Motors and Brake Calipers
- Once fully cured, DiamondFinish Clear is 100% non-toxic.
- Graffiti Proof
- Re-coat in 1-2 hours
- Seals Ferrous and Non-Ferrous metals
- Shelf Life: At least 2 years when unopened from date of purchase. After opening, when the directions for use and storage are followed, typically 6 months.
- Protecting steel and plastic bumpers paint work.
- Ideal for clear coating Fishing Lures and Crankbaits
- Automotive aluminum fitting, fuel tanks and parts.
- Protecting existing paint work from physical damage.
- Stopping chemical attack from acids and alkalis on existing paint work.
- Protecting paint work from all fuels.
- Ideal for clear coating Tumblers.
- Ideal for clear coating custom Coasters.
- Used by Boaters to Revitalize Clear Coat on Fiberglass Boats - Boat Bottoms and Boat Topsides.
- Excellent Clear Coat to Clear Coat Aluminum John Boats.
- Graffiti Protection.
- Custom Automotive Refinish.
- Marine internal and external Refinish.
