Edelbrock 7102 Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8

Edelbrock
ELB7102
This is a SPECIAL ORDER part. This item can be brought in either with a stock order or on its own. Contact us today to discuss available options BEFORE ordering.
$555.77
$521.07
$555.77

Verify fitment with your vehicle
Edelbrock 7102 Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8

Vendor: Edelbrock

Edelbrock 7102 Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8

$521.07 $555.77

Vendor: Edelbrock

Edelbrock 7102 Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8

$521.07 $555.77
Edelbrock part #7102 Performer RPM Camshaft is designed for 1957-1986 small-block Chevy 283-400 V-8. This Edelbrock cam kit produced 410 HP & 408 ft-lbs. of torque when used with #7501 intake and #60899 cylinder heads on a 350 engine.
Edelbrock part #7102 Performer RPM Camshaft is designed for 1957-1986 small-block Chevy 283-400 V-8 applications. This Edelbrock cam kit produced 410 HP & 408 ft-lbs. of torque when used with #7501 intake and #60899 cylinder heads on a 350 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 234 degrees - Duration @ .050 Exhaust: 244 degrees - Lift @ Valve Intake: .488" - Lift @ Valve Exhaust: .510" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 11"
  • Designed for 1500 to 6500 RPM Performance
  • Maximum Power in High-RPM with Good Low-End Torque
  • Matched to Edelbrock Performer RPM Intakes
  • 10 to 12 in. of Manifold Vacuum at Idle
  • More Lift and Duration than Most Street Camshafts
  • Includes Hydraulic Lifters and Assembly Lube
  • Dyno-Matched/Street-Proven Performance
  • Take the Guesswork Out of Camshaft Selection!

Application Summary:

Year Make/Model
1965-1969 Avanti II
1973 Avanti II
1976-1985 Avanti II
1977-1981 Buick Century
1978 Buick LeSabre
1982 Buick LeSabre
1977-1986 Buick Regal
1977-1979 Buick Skylark
1966-1968 Checker Aerobus
1969 Checker Deluxe
1965-1969 Checker Marathon
1975-1982 Checker Marathon
1969 Checker Taxicab
1959 Chevrolet 3B
1959 Chevrolet 3C
1959 Chevrolet 3D
1959 Chevrolet 3E
1959 Chevrolet 3F
1959 Chevrolet 3G
1955-1975 Chevrolet Bel Air
1981 Chevrolet Bel Air
1958-1972 Chevrolet Biscayne
1969-1973 Chevrolet Blazer
1958-1961 Chevrolet Brookwood
1969-1972 Chevrolet Brookwood
1975-1986 Chevrolet C10
1960-1973 Chevrolet C10 Pickup
1967-1973 Chevrolet C10 Suburban
1975-1986 Chevrolet C10 Suburban
1975-1986 Chevrolet C20
1960-1973 Chevrolet C20 Pickup
1967-1973 Chevrolet C20 Suburban
1975-1986 Chevrolet C20 Suburban
1975-1986 Chevrolet C30
1960-1973 Chevrolet C30 Pickup
1960-1962 Chevrolet C40
1967-1973 Chevrolet Camaro
1975-1986 Chevrolet Camaro
1966-1986 Chevrolet Caprice
1964-1973 Chevrolet Chevelle
1963-1968 Chevrolet Chevy II
1955-1968 Chevrolet Corvette
1975-1982 Chevrolet Corvette
1984-1986 Chevrolet Corvette
1957-1958 Chevrolet Del Ray
1959-1960 Chevrolet El Camino
1964-1986 Chevrolet El Camino
1969-1970 Chevrolet Estate
1975-1986 Chevrolet G10
1968-1973 Chevrolet G10 Van
1975-1986 Chevrolet G20
1967-1973 Chevrolet G20 Van
1975-1986 Chevrolet G30
1958-1985 Chevrolet Impala
1975-1986 Chevrolet K10
1960-1973 Chevrolet K10 Pickup
1967-1973 Chevrolet K10 Suburban
1975-1986 Chevrolet K10 Suburban
1975-1986 Chevrolet K20
1967 Chevrolet K20 Panel
1960-1973 Chevrolet K20 Pickup
1967-1973 Chevrolet K20 Suburban
1975-1986 Chevrolet K20 Suburban
1977-1986 Chevrolet K30
1968-1973 Chevrolet K30 Pickup
1975-1986 Chevrolet K5 Blazer
1959-1961 Chevrolet Kingswood
1969-1972 Chevrolet Kingswood
1973-1976 Chevrolet Laguna
1964-1967 Chevrolet Malibu
1973-1983 Chevrolet Malibu
1970-1986 Chevrolet Monte Carlo
Year
Make
Model
Engine
Notes
1969 - 1972
Avanti
II
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1981 - 1985
Avanti
II
5.0L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1965 - 1969
Avanti
II
5.3L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1969 - 1971, 1977 - 1980
Avanti
II
5.7L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1973 - 1974, 1976
Avanti
II
6.6L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1977 - 1981
Buick
Century
5.0L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1977 - 1979
Buick
Century
5.7L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1978
Buick
LeSabre
5.0L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1977 - 1980, 1982 - 1986
Buick
Regal
5.0L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1977
Buick
Regal
5.7L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1977 - 1979
Buick
Skylark
5.0L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1977 - 1979
Buick
Skylark
5.7L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1966 - 1968
Checker
Aerobus
5.3L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1969 - 1974
Checker
Aerobus
5.7L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1969
Checker
Deluxe
5.3L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1969 - 1970
Checker
Deluxe
5.7L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1969 - 1974
Checker
Marathon
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1965 - 1967
Checker
Marathon
4.6L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1968, 1977 - 1981
Checker
Marathon
5.0L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1965 - 1969
Checker
Marathon
5.3L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
1968 - 1969
Checker
Marathon
5.4L
Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles
Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads