Kenwood KAC-M8005 5-channel marine amplifier 50 watts RMS x 4 at 4 ohms + 500 watts RMS x 1

Kenwood KAC-M8005 5-channel marine amplifier 50 watts RMS x 4 at 4 ohms + 500 watts RMS x 1

KENWOOD
KENKAC-M8005
Heads up — this is a Special Order item. We don't carry it on the shelf, but we can bring it in for you! Lead times vary and can be 10 weeks or more depending on the manufacturer. Give us a call or send us a message so we can check current availability and walk you through your options before you commit to an order.
$548.00
$579.99
$548.00
<p>Earn%20[points_amount]%20when%20completing%20this%20purchase.</p>
Kenwood KAC-M8005 5-channel marine amplifier 50 watts RMS x 4 at 4 ohms + 500 watts RMS x 1

KENWOOD

Kenwood KAC-M8005 5-channel marine amplifier 50 watts RMS x 4 at 4 ohms + 500 watts RMS x 1

$579.99 $548.00
Kenwood KAC-M8005 5-channel marine amplifier 50 watts RMS x 4 at 4 ohms + 500 watts RMS x 1

KENWOOD

Kenwood KAC-M8005 5-channel marine amplifier 50 watts RMS x 4 at 4 ohms + 500 watts RMS x 1

$579.99 $548.00
Description

Class D 5-Channel Marine Power Amplifier

KAC-M8005

General Features:

MAX Power 1600W

RMS Power

50W x 4 + 300W (4and Omega;)
and
75W x 4 + 500W (2and Omega;)
and
150W x 2 (Bridged) + 300W (4and Omega;)
Conformal Coating*
Speaker Level Input
Signal Sensing Turn-on
Variable Low and amp; High-pass Filter
Bass Boost
(W)9and rdquo; x (H)2-3/16and rdquo; x (D)7-3/8and rdquo;
* Conformal Coating: Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

Specs:

CEA-2006 Primary Ratings Power Output 50 Watts RMS x 4 + 300 Watts RMS x 1
at 4 Ohms and and le;1%THD+N
Signal-to-Noise Ratio 80dBA (Reference: 1Watt into 4Ohms)
Maximum Power Output MAX POWER 1600W
Rated Power Output at 14.4V A/B (4 Ohms) 50Watts RMS x 4 (4 Ohms, 20-20kHz, and le;1.0% THD)
A/B (2 Ohms) 75Watts RMS x 4 (2 Ohms, 1kHz, and le;1.0% THD)
SUB (4 Ohms) 300Watts RMS x 1 (4 Ohms, 20-200Hz, and le;0.5% THD)
SUB (2 Ohms) 500Watts RMS x 1 (2 Ohms, 100Hz, and le;0.5% THD)
A/B (Bridged 4Ohms) 150Watts RMS x 2 (Bridged 4 Ohms, 1kHz, and le;1.0% THD)
Specifications Signal to Noise Ratio 100dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response 20Hz-50kHz (+0dB, -3dB) A/B
20Hz-200Hz (+0dB, -3dB) SUB
Input Impedance 10k ohm
Speaker Impedance 4and Omega; (2and Omega; to 8and Omega; allowable)
Bridged Connection 4and Omega; to 8and Omega; allowable
Audio Section Low-Pass Filter 50Hz-200Hz, -24dB/oct (SUB)
High-Pass Filter 50Hz-200Hz, -12dB/oct (A/B)
Bass Boost 40Hz, 0dB - +18dB (SUB)
RCA Input Sensitivity 0.2[V] - 5.0 [V]
Speaker Level Input Sensitivity 4.0[V] - 12.0 [V]
Terminals Battery and amp; Ground M6 Screw Type Terminal Block
Speaker Output M4 Screw Type Terminal Block
General Dimensions(WxHxD) 9 x 2-3/16 x 7-3/8 [inch]
Operating Voltage 14.4V（11-16V allowable）
Current Consumption 58[A]
Key Features CEA-2006 Compliant
2 Ohms Load Capability
Speaker Level Input with Signal Sensing Turn-on
Power MOS-FET Switching Power Supply
Extruded Aluminum Heat Sink Design
A B Sub Independent Gain Adjustment
Fitment
Read More
FAST EFFICIENT SHIPPING!

Through our distribution network Deliveries can be as fast as Next Day Delivery. Delivery times vary by destination, tracking information is provided with every purchase.
GET IT INSTALLED!

JB's Power Centre offers on-site professional installation services in Calgary and Edmonton, AB. We have on staff licensed Mechanical Technicians as well as MECP Certified 12-Volt Technicians.
* EXTEND YOUR PRODUCTS MANUFACTURER WARRANTY

All products include a manufacturer warranty, but you can extend this warranty with JB's Purchase Protection Plan.
*Available on select products.