Permatex High Temperature Anaerobic Gasket Maker 510, 50ml Tube

51031

Details:

A high temperature sealant specially engineered for making or dressing gaskets in rigid assemblies. Able to withstand temperatures to 400F (204C), fills gaps up to 0.020 (primed) and permits clamping loads to be maintained for strong, leakproof assemblies.

Application:

Automobile

Suggested Applications:Water pumps, thermostat housings, engine cases, timing covers, transmission pans, transmission case covers, and transaxle casings.

Instruction:

TO MAKE A GASKET:

1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
2. Spray Permatex Surface Prepactivator on one surface only. Allow to dry 1-2 minutes.
3. Apply a continuous bead of sealant to the unprimed surface.
4. Assemble mating surfaces with minimal lateral movement. Excess sealant can be wiped awaywith a cloth and shop solvent.

TO DRESS A GASKET:

1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
2. Spray Permatex Surface Prepactivator to both flange surfaces. Allow to dry 1-2 minutes.
3. Completely cover both sides of the precut gasket with sealant.
4. Place coated gasket on flange, and assemble mating surfaces with minimal lateral movement.