BDS Suspension 4 Inch Lift Kit w/ Radius Arms, FOX 2.5 Coil over Conversion - Performance Elite, Ford F450 Super Duty (23-27) 4WD, FOX 2.5 Performance Series Rear Shocks

PN. BDS1226PPS

A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.

This part number is configured with rear shock: FOX 2.5 Performance Series Rear Shocks. Front lift: 4 in (coil-over). Rear lift: 3.5 in (block). Clears tires up to 37 x 12.5. Recommended tire and wheel setups: 37 x 12.5 tires on 18 x 9 wheels; 37 x 12.5 tires on 20 x 10 wheels. Estimated installation time is 8-10 hrs, rated difficult. Installation notes: Fits diesel models only; These kits are designed for the F-450 style front end . They do not work with the standard Ford Super Duty F-250/350 axle width; Vehicles with radius arm mounted ride height sensors will require BDS123303; Larger tires on stock wheels are not recommended due to brake line clearance required. Use recommended specifications listed in tire and wheel fitment section; Installation requires a torque wrench capable of 405 ft-lbs; Recalibration of your vehicles Advanced Driver Assistance System (ADAS) cameras, radars, light detection and ranging (LiDAR), and other sensors may be necessary by your local dealership or ADAS service center. This will ensure proper functionality of the vehicle features such as lane keeping, lane departure, parking assistance, blind-spot detection, adaptive cruise control systems, and other functions as they did prior to installation. Please connect with your local dealership or ADAS service center. Similar to a wheel alignment, all charges and expenses that may occur from dealership calibrations and adjustments are the sole responsibility of the vehicle owner.

Features and Benefits:

• BDS Forged pitman arm to maximize steering radius at 4" of lift
• BDS Radius arms are made from heavy duty DOM steel
• BDS Radius arms restore proper caster angle, axle alignment, and suspension geometry, which helps maintain predictable steering, stable handling, and prevents wander or tire wear
• Rather than rigid joints, the kit uses OE-style rubber bushings at the frame mounts. These bushings isolate noise and vibration , provide a smoother, quieter ride, and require no ongoing greasing or maintenance
• Choice of FOX 2.5 Performance Series HTO or FOX 2.5 Performance Elite Shocks in the rear