



A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.
This part number is configured with rear shock: FOX 2.0 Performance Series Rear Shocks; OE knuckle type: Cast Aluminum. Front lift: 3.5 in (coil-over). Rear lift: 1.5 in (block). Clears tires up to 285 / 65. Recommended tire and wheel setups: 285/65 tires on 18 x 9 wheels with 5.75 in backspacing; 305/55 tires on 20 x 9 wheels with 5 in backspacing. Estimated installation time is 4 hrs, rated moderate. Installation notes: Aftermarket wheels must have a minimum of 93.1mm center hub bore; Tires larger than 285/70r17 or 285/65r18 cannot be installed on factory wheels due to steering knuckle clearance; Will NOT work on trucks equipped with cast steel steering knuckles; For 3" - Ford produces two knuckle/control arm configurations In 2019-2023 Model Rangers. Cast Steel Knuckle Equipped Models Have Different Ball Joints Than Models Equipped With Aluminum Knuckles. Be Sure To Verify Which Factory Knuckle Your Truck Has Before Ordering; Does not work on Tremor models.
Features and Benefits:
Thanks for subscribing!
This email has been registered!