

A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.
This part number is configured with shock: FOX 2.0 Performance Series Shocks. Front lift: 5.5 in (coil spacer). Rear lift: 6 in (coil spacer). Clears tires up to 37 x 12.5. Recommended tire and wheel setups: 37 x 12.5 tires on 17 x 9 wheels with 4.5 in backspacing; 37 x 12.5 tires on 17 x 9 wheels with 5.625 in backspacing; 37 x 12.5 tires on 20 x 9 wheels with 5.625 in backspacing. Estimated installation time is 8 hrs, rated moderate. Installation notes: 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft; The carrier bearing drop is necessary for models equipped with two-piece rear drive shaft; Some vehicles may require a rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement; DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6" kits.
Features and Benefits:
Thanks for subscribing!
This email has been registered!