BDS Suspension 6.5 Inch Lift Kit, FOX Performance Elite, Chevy Silverado or GMC Sierra 2500HD/3500HD (20-26) 4WD, 6 Inch Block Kit With Overload

PN. BDS1825FPE

A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.

This part number is configured with rear lift: 6 Inch Block Kit With Overload. Front lift: 6.5 in (cross-member). Rear lift: 6 in (block). Clears tires up to 38 x 13.5. Recommended tire and wheel setups: 38 x 13.5 tires on 20 x 9 wheels with 6.18 in backspacing; 37 x 12.5 tires on 20 x 9 wheels with 4.5 in backspacing. Estimated installation time is 8 hrs, rated difficult. Installation notes: For DRW models, use the w/ overload rear lift option; Requires frame bracket modification; Torsion Bar Tool required to load/unload torsion bars; Models with two-piece rear driveshafts will require a carrier bearing drop kit; Factory 17-18" wheels cannot be reinstalled due to tie rod end interference, stock 20" wheels can be reinstalled with up to a 35x12.50 tire; In some cases, vehicles used in 4WD on the highway frequently could potentially experience a minor front driveline vibration. If this occurs we recommend replacing the front driveshaft with a dual Cardan style driveshaft; Do not install this suspension system in conjunction with any type of torsion bar lift keys to achieve more than the tested 6.5" lift height; Some minor trim will be required with certain wheel/tire combinations. This is normal with most aftermarket tire/wheel fitment on Chevy/GM trucks. Trimming will normally include the bottom edge of the inner fender shrouds and/or the lower corner of the front bumper valance. As a rule of thumb, deeper backspacing and shorter/narrower tires will reduce/eliminate trimming required; Further trimming tips are included at the end of this instruction sheet; Will NOT work with AT4X or ZR2 models, lower control arm profile is different.

Features and Benefits:

• High Clearance design w/ no torsion bar drop maximizes ground clearance
• Robust steering knuckles maintain ESC system compliance
• HD skid plate system improved offroad protection
• Multipoint differential relocation brackets to secure the front axle and improve CV angles
• FOX 2.5 shocks designed specifically for increase travel and the ability to soak up the roughest terrain
• DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs
• Factory Protection Plus drivetrain warranty included