BDS Suspension 1.5 Inch Lift Kit, FOX CoilOver, Chevy Trail Boss or GMC AT4 1500 (25-26) 4WD, FOX 2.5 Performance Elite Coil-Over, FOX 2.5 Performance Elite Series Rear Shock

PN. BDS1858PES

A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.

This part number is configured with front shock: FOX 2.5 Performance Elite Coil-Over; rear shock: FOX 2.5 Performance Elite Series Rear Shock. Front lift: 1.5 in (coil-over). Rear lift: 0.5 in (block). Clears tires up to 33 x 12.5. Recommended tire and wheel setups: 33 x 12.5 tires on 17 x 9 wheels with 4.5 in backspacing; 33 x 12.5 tires on 20 x 9 wheels with 5 in backspacing; 35 x 12.5 tires on 20 x 9 wheels with 5.5 in backspacing. Estimated installation time is 4-5 hrs, rated moderate. Installation notes: Fits 4WD models only; Lift heights specific for Trail Boss and AT4 models only; Will not fit models with Adaptive Ride Control (ARC); Requires a maximum of 5.5" BS Wheel for tire clearance to the upper ball joint; All aftermarket wheels should be test fit prior to mounting the tire to ensure proper clearance to the brake caliper. Some wheel profiles will not clear the brake caliper. These can be test fitted before the vehicle is lifted in a stock condition; Mono-Leaf models require Qty 4 UBT4025 u-bolts for installation.

Features and Benefits:

• Builds off factory suspension geometry for improved performance with easy install
• Option of FOX 2.0 Performance Series, FOX 2.5 Performance Series FOX 2.5 Performance Elite, or FOX 3.0 Factory Race Series coil-overs offer improved damper performance over stock
• BDS HD upper control arms for strength and increased suspension travel
• High misalignment angle, greaseable heavy duty ball joints
• Rubber control arm bushings to promote long life and no maintenance of the joint
• Rear lift block kit to produce a level to slightly tail height stance. 1/4" wheel spacer provided to be used with the spare tire if needed
• Optional weld on steering stops to help tire clearance to fenders, control arms, etc. Dependent upon wheel offset selected
• Factory Protection Plus included