BDS Suspension 6 Inch Lift Kit, Ford F150 (21-26) 4WD, 4 Inch Block Kit, NX2 Nitro Series Rear Shocks
PN. BDS1900H
A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.
This part number is configured with rear lift: 4 Inch Block Kit; rear shock: NX2 Nitro Series Rear Shocks. Front lift: 6 in (cross-member). Rear lift: 3 in or 4 in (block). Clears tires up to 35 x 12.5. Recommended tire and wheel setups: 35 x 12.5 tires on 18 x 9 wheels with 5 in backspacing; 35 x 12.5 tires on 20 x 9 wheels with 4.5 in backspacing; 37 x 12.5 tires on 20 x 9 wheels with 5.5 in backspacing. Estimated installation time is 8-10 hrs, rated difficult. Installation notes: 18" or larger diameter wheels are required. Stock 17" and 18" wheels cannot be re-installed. Stock 20" wheels can be used with up to a 305/60R20 tire; 18" wheels with 5-5.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle/tie rod. 5.5" backspacing is highly recommended for tire-to-frame crash bar clearance; Models with 2-piece rear driveshaft WILL require carrier bearing shim kit 122406 (not included w/ kit); Block kits replace factory 1-1/4" block. The stock block will not be reinstalled; Crash bars may require modification based on wheel and tire choice. It is the end user's responsibility to ensure modifications are non-detrimental to vehicle safety; Does NOT fit diesel models; Will not work with Tremor models; Some trucks with a 2 piece drive shaft may have a recall from Ford regarding the rear driveshaft. (Safety Recall 21S25) Due to the recall procedure, BDS recommends having this performed prior to installing the lift; Will not work with models with CCD (Continuous Controlled Damping); Recalibration of your vehicles Advanced Driver Assistance System (ADAS) cameras, radars, light detection and ranging (LiDAR), and other sensors may be necessary by your local dealership or ADAS service center. This will ensure proper functionality of the vehicle features such as lane keeping, lane departure, parking assistance, blind-spot detection, adaptive cruise control systems, and other functions as they did prior to installation. Please connect with your local dealership or ADAS service center. Similar to a wheel alignment, all charges and expenses that may occur from dealership calibrations and adjustments are the sole responsibility of the vehicle owner.
Features and Benefits:
- High clearance crossmembers improve strength and offroad capability
- Heavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility
- Top mounted strut spacers to provide lift and install easily
- Differential skid plate for improved offroad protection
- Rear lift blocks and u-bolts to lift and level the stance
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
- Functions with Blue Cruise
