BDS Suspension 6 Inch Lift Kit w/ Radius Arm, FOX 2.5 Performance Elite Coil-Over Conversion, Ford F250/F350 Super Duty (08-10) 4WD, Diesel, Block Kit With Factory Overload

PN. BDS1954FPE

A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.

This part number is configured with rear lift: Block Kit With Factory Overload. Front lift: 6 in (coil-over). Rear lift: 3 in or 6 in (block, leaf spring). Clears tires up to 37 x 12.5. Recommended tire and wheel setups: 37 x 12.5 tires on 20 x 9 wheels with 4.5 in backspacing. Estimated installation time is 8 hrs, rated moderate. Installation notes: Removal of the factory block is required; Installation of the rear block kit will result in a "pre-runner" look with the rear of the vehicle 2" lower than the front. To get a level stance you must upgrade to the rear leaf spring option; These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering; If your vehicle is equipped with a carrier bearing, you will need to order 123402 in the options section; Although extremely rare, front driveline vibration may occur; Front exhaust modification may be required to clear the front driveshaft on gas models; U-bolts will not fit dually models; Dropped pitman arm will not fit 10 lug wide track F350 models.

Features and Benefits:

• FOX 2.5 Coil-Over mounts in factory coil bucket location
• Adds additional secondary FOX 2.0 shock for max performance
• Eibach coil springs ride smooth through the roughest terrain
• Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
• Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
• Fabricated steel blocks provide level stance from front to rear
• FOX shocks are fully serviceable and resistant to corrosion and harsh environments