BDS Suspension 4 Inch Lift Kit w/ Radius Arm, FOX 2.5 Coil-Over Conversion - Performance Elite, Ram 3500 (13-18) 4WD, Diesel, Rubber Bump Stop, 6 Bolt, FOX 2.5 Performance Series HTO Shocks
PN. BDS2129PPS
A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.
This part number is configured with front bump stop: Rubber Bump Stop; indexing ring: 6 Bolt; shock: FOX 2.5 Performance Series HTO Shocks. Front lift: 4 in (coil-over). Rear lift: 2 in (block). Clears tires up to 37 x 12.5. Recommended tire and wheel setups: 37 x 12.5 tires on 17 x 9 wheels with 5 in backspacing; 37 x 12.5 tires on 20 x 9 wheels with 5 in backspacing; 37 x 13.5 tires on 20 x 9 wheels with 5.625 in backspacing. Estimated installation time is 7-8 hrs, rated difficult. Installation notes: Will not fit air ride equipped models; Diesel models only; Must be used with an aftermarket front drive shaft due to increased wheel travel; The carrier bearing drop is necessary for models equipped with the two-piece rear drive shaft; Some vehicles may require a rear driveshaft spacer kit BDS122007 to maintain adequate rear driveshaft engagement.
Features and Benefits:
- Fox 2.5 Performance Elite Coil over mounts in the factory coil spring bucket
- Fox 2.5 Performance Elite rear shocks
- Optional Auxiliary front shock absorber
- Heavy Duty tubular steel radius arms which correct caster while maximizing ground clearance
- Front adjustable track bar which allows the front of the truck to be re-centered after lifted
- Front sway bar correction to maintain handling performance
