BDS Suspension 6 Inch Lift Kit w/ Radius Arm, Ram 3500 (13-18) 4WD, Diesel, 4.5 Inch Leaf Springs, 6 Bolt, NX2 Nitro Series Shocks
PN. BDS2141H
A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.
This part number is configured with rear lift: 4.5 Inch Leaf Springs; indexing ring: 6 Bolt; shock: NX2 Nitro Series Shocks. Front lift: 6 in (coil spring). Rear lift: 4 in or 4.5 in or 5 in (block, leaf spring). Clears tires up to 37 x 13.5. Recommended tire and wheel setups: 37 x 13.5 tires on 17 x 9 wheels with 5.625 in backspacing; 37 x 12.5 tires on 17 x 9 wheels with 4.5 in backspacing; 37 x 12.5 tires on 18 x 9 wheels with 4.5 in backspacing. Estimated installation time is 6-8 hrs, rated moderate. Installation notes: The carrier bearing drop is necessary for models equipped with the two-piece rear drive shaft; Some vehicles may require a rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement; Will not fit air ride equipped models; Diesel models only.
Features and Benefits:
- Heavy duty tubular radius arms improve strength, handling and caster control
- Front high strength progressive rate coil springs for a great ride on any terrain
- Front track bar relocation bracket to re-position axle
- Forged drop pitman arm to correct steering angles
- Front sway bar correction to maintain handling performance
- HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
- BDS NX2 gas, FOX Performance Series IFP, or FOX Performance Elite Series gas shocks to improved ride and offroad performance
