BDS Suspension 5 Inch Lift Kit w/ Radius Arm, Ford F250/F350 Super Duty (23-27) 4WD, Gas, Leaf Springs, FOX 2.0 Performance Series Shocks

PN. BDS2209FS

A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.

This part number is configured with rear lift: Leaf Springs; shock: FOX 2.0 Performance Series Shocks. Front lift: 5 in (coil spring). Rear lift: 4 in or 5 in (block, leaf spring). Clears tires up to 37 x 12.5. Recommended tire and wheel setups: 37 x 12.5 tires on 17 x 9 wheels with 5 in backspacing; 37 x 12.5 tires on 18 x 9 wheels with 5 in backspacing; 37 x 12.5 tires on 20 x 9 wheels with 5 in backspacing. Estimated installation time is 6-8 hrs, rated difficult. Installation notes: Ford recommends the replacement of the pitman arm nut after each time it has been removed; Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper; If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402; Due to the taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models; Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section; Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups; Installation requires a torque wrench capable of 406 ft-lbs; Trucks without top mounted overload springs will require (4) UBT4028; Fits SRW models only; Exhaust modification is required to clear the front driveshaft. The vehicle can be driven w/o a front driveshaft to an exhaust shop; Recalibration of your vehicles Advanced Driver Assistance System (ADAS) cameras, radars, light detection and ranging (LiDAR), and other sensors may be necessary by your local dealership or ADAS service center. This will ensure proper functionality of the vehicle features such as lane keeping, lane departure, parking assistance, blind-spot detection, adaptive cruise control systems, and other functions as they did prior to installation. Please connect with your local dealership or ADAS service center. Similar to a wheel alignment, all charges and expenses that may occur from dealership calibrations and adjustments are the sole responsibility of the vehicle owner; Vehicles with radius arm mounted ride height sensors will require BDS123303.

Features and Benefits:

• Easy, 100% Bolt-on installation
• Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
• Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
• Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
• Fabricated steel blocks provide level stance from front to rear
• Standard NX2 Nitro shocks with vehicle-specific valving for better control
• Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road