

A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.
This part number is configured with shock: FOX 2.0 Performance Series Shocks. Front lift: 5 in (coil spring). Rear lift: 3 in (block). Clears tires up to 37 x 12.5. Recommended tire and wheel setups: 37 x 12.5 tires on 17 x 9 wheels; 37 x 12.5 tires on 18 x 9 wheels; 37 x 12.5 tires on 20 x 9 wheels. Estimated installation time is 6-8 hrs, rated difficult. Installation notes: Fits dual rear wheel F-350's; Ford recommends the replacement of the pitman arm nut after each time it has been removed; Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper; If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402; Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section; Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups; Installation requires a torque wrench capable of 406 ft-lbs; Vehicles with radius arm mounted ride height sensors will require BDS123303.
Features and Benefits:
Thanks for subscribing!
This email has been registered!