BDS Suspension 6 Inch Lift Kit, Ford F250/F350 Super Duty (08-10) 4WD, Diesel, Block Kit Without Factory Overload, NX2 Nitro Series Shocks

PN. BDS558H

A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.

This part number is configured with rear lift: Block Kit Without Factory Overload; shock: NX2 Nitro Series Shocks. Front lift: 6 in (coil spring). Rear lift: 4 in or 6 in (block, leaf spring). Clears tires up to 37 x 12.5. Recommended tire and wheel setups: 37 x 12.5 tires on 17 x 9 wheels with 4.5 in backspacing; 37 x 12.5 tires on 18 x 9 wheels with 4.5 in backspacing; 37 x 12.5 tires on 20 x 9 wheels with 4.5 in backspacing. Estimated installation time is 8 hrs, rated moderate. Installation notes: Removal of the factory block is required; Installation of the rear block kit will result in a "pre-runner" look with the rear of the vehicle 2" lower than the front. To get a level stance you must upgrade to the rear leaf spring option; These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering; If your vehicle is equipped with a carrier bearing, you will need to order 123402 in the options section; Although extremely rare, front driveline vibration may occur; Front exhaust modification may be required to clear the front driveshaft on gas models; U-bolts will not fit dually models; Dropped pitman arm will not fit 10 lug wide track F350 models.

Features and Benefits:

• Easy, 100% Bolt-on installation
• Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
• Heavy duty radius arm drop brackets provide correct caster and will maintain your stock driving characteristics
• Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
• Steel lift blocks with built-in bump stop provide level stance from front to rear
• Standard NX2 Nitro shocks with vehicle-specific valving for better control
• Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road