BDS Suspension 6 Inch Lift Kit, Dodge Ram 1500 (2012) 4WD, 3 Inch Coil Springs, NX2 Nitro Series Rear Shocks
PN. BDS663H
A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.
This part number is configured with rear lift: 3 Inch Coil Springs; rear shock: NX2 Nitro Series Rear Shocks. Front lift: 6 in (cross-member). Rear lift: 3 in or 5 in (coil spring). Clears tires up to 37 x 13.5. Recommended tire and wheel setups: 37 x 13.5 tires on 17 x 9 wheels with 4.5 in backspacing; 37 x 13.5 tires on 18 x 9 wheels with 5 in backspacing; 37 x 13.5 tires on 20 x 9 wheels with 5 in backspacing. Estimated installation time is 10 hrs, rated moderate. Installation notes: These trucks vary from 1"-3" tail high from the factory. Be sure to measure your vehicle before ordering. The 022209, 022309, and 022509 can all be substituted to achieve the desired stance; The Rack and Pinion steering system is extremely sensitive to an out-of-round or out-of-balance tire/wheel combination. As you increase the tire diameter and/or decrease the wheel backspacing the more sensitive the system becomes and can cause minor steering wheel shimmy; Not recommended for AWD models; Stock 17" and 18" wheels can not be re-installed. Stock 20" can be reinstalled with a factory tire; TRX models will achieve approximately 1" of additional lift. This lift is not recommended for use on the TRX models due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4" lift system for 5" of lift or replace the TRX struts with standard struts for use with this system; Will not fit adjustable air suspension equipped models; This kit does not fit 2013 models; This kit is FMVSS No.126 Compliant.
Features and Benefits:
- High clearance crossmember design maximizes ground clearance
- Robust steering knuckles maintain ESC system compliance
- HD skid plate system improved offroad protection
- Multipoint differential relocation brackets to secure the front axle and improve CV angles
- BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
- Factory Protection Plus drivetrain warranty included
