BDS Suspension 6 Inch Lift Kit, Ram 1500 (13-18) 4WD, 3 Inch Coil Springs, NX2 Nitro Series Shocks BDS671H

BDS Suspension
BDSBDS671H
Heads up — this is a Special Order item. We don't carry it on the shelf, but we can bring it in for you! Lead times vary and can be 10 weeks or more depending on the manufacturer. Give us a call or send us a message so we can check current availability and walk you through your options before you commit to an order. Note: If you place an order without consulting with us for this product, the shipping information selected at Checkout does not represent the time it takes to get the product from the manufacturer.
$3,701.48
$3,701.48
$3,701.48

<p>Earn%20[points_amount]%20when%20completing%20this%20purchase.</p>
BDS Suspension 6 Inch Lift Kit, Ram 1500 (13-18) 4WD, 3 Inch Coil Springs, NX2 Nitro Series Shocks BDS671H

Vendor: BDS Suspension

BDS Suspension 6 Inch Lift Kit, Ram 1500 (13-18) 4WD, 3 Inch Coil Springs, NX2 Nitro Series Shocks BDS671H

$3,701.48

Vendor: BDS Suspension

BDS Suspension 6 Inch Lift Kit, Ram 1500 (13-18) 4WD, 3 Inch Coil Springs, NX2 Nitro Series Shocks BDS671H

$3,701.48

BDS Suspension 6 Inch Lift Kit, Ram 1500 (13-18) 4WD, 3 Inch Coil Springs, NX2 Nitro Series Shocks

PN. BDS671H

A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.

This part number is configured with rear lift: 3 Inch Coil Springs; shock: NX2 Nitro Series Shocks. Front lift: 6 in (cross-member). Rear lift: 3 in or 5 in (coil spring). Clears tires up to 37 x 12.5. Recommended tire and wheel setups: 37 x 12.5 tires on 17 x 9 wheels with 4.5 in backspacing; 37 x 12.5 tires on 18 x 9 wheels with 5 in backspacing; 37 x 12.5 tires on 20 x 9 wheels with 5 in backspacing. Estimated installation time is 10 hrs, rated moderate. Installation notes: The Rack and Pinion steering system is extremely sensitive to an out-of-round or out-of-balance tire/wheel combination. As you increase the tire diameter and/or decrease the wheel backspacing the more sensitive the system becomes and can cause minor steering wheel shimmy; Not recommended for AWD models; Stock 17" and 18" wheels can not be re-installed. Stock 20" can be reinstalled with a factory tire; Will not fit adjustable air suspension equipped models; This kit will bolt on Eco-Diesel models but it will require an aftermarket front drive shaft; TRX models will achieve approximately 1" of additional lift. This lift is not recommended for use on the TRX models due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4" lift system for about 5" of lift or replace the TRX struts with standard struts for use with this system; This kit is FMVSS No.126 Compliant.

Features and Benefits:

  • High clearance crossmember design maximizes ground clearance
  • Robust steering knuckles maintain ESC system compliance
  • HD skid plate system improved offroad protection
  • Multipoint differential relocation brackets to secure the front axle and improve CV angles
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
  • Factory Protection Plus drivetrain warranty included