BDS Suspension 3 Inch Lift Kit, FOX 2.5 Performance Elite Coilover, Chevy Silverado or GMC Sierra 1500 (07-18) 4WD, FOX 2.5 Performance Elite / Aluminum / Stamped Steel

PN. BDS758PES

A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.

Front lift: 3 in (coil-over). Rear lift: 1 in (block). Clears tires up to 33 x 12.5. Recommended tire and wheel setups: 33 x 12.5 tires on 18 x 9 wheels with 5 in backspacing; 33 x 12.5 tires on 20 x 9 wheels with 5 in backspacing; 285/70 tires on 20 x 9 wheels with 4.5 in backspacing. Estimated installation time is 4-5 hrs, rated moderate. Installation notes: *IMPORTANT*: Cast aluminum lower control arm required for '16-18 model year trucks for CV boot clearance. - OE aluminum lower control arm reference numbers = 22853473 and 22853474, or equivalents. - Cast aluminum and stamped steel lower control arms have the same ball joint taper. - Cast steel LCAs have a different ball joint taper and would not be usable for ’16-'18 model years; *IMPORTANT*: GM is producing several knuckle/control arm configurations in 2007-2018 models trucks. Cast Steel control arm equipped models will require the "Cast Steel Control Arm" kit. Stamped Steel and Aluminum control arm equipped models will require the "Aluminum Control Arm" kit. Be sure to verify which factory control arms your truck has before ordering by referencing our help images when customizing your kit; 33x12.50 tires will require weld on steering stop, also it requires inner fender well modification to clear this width tire; Factory wheels cannot be reinstalled due to upper control arm interference; Will Not fit MagneRide magnetic ride control equipped models; This system will not fit 2007 classic models.

Features and Benefits:

• FOX 2.5 Performance Elite coilovers offer improved damper performance over stock
• DSC Adjuster allows easy high-speed and low-speed compression tuning for optimal performance in any terrain
• Made in the USA fabricated upper control arms featuring geometry corrected high strength ball joints along with OE style bushings to provide long lasting quite ride comfort
• Choice of FOX 2.5 Performance Elite or FOX 2.0 Performance Series IFP rear shocks
• Factory Protection Plus drivetrain warranty included
• Easy, 100% Bolt on installation