BDS Suspension 3 Inch Lift Kit, Chevy Silverado or GMC Sierra 2500HD/3500HD (20-26), 2 Inch Block Kit With Overload, FOX 2.0 Performance Series Shocks

PN. BDS761FS

A BDS Suspension lift kit raises your truck or SUV to make room for larger tires and add ground clearance, while correcting the geometry that matters for a good ride and safe handling. Each kit is engineered for the vehicle it fits, with components chosen to restore steering, driveline and suspension angles after the lift. BDS kits are offered with a choice of shock packages, so you can match the ride to how you use your vehicle, from daily driving and towing to trail and off-road use.

This part number is configured with rear lift: 2 Inch Block Kit With Overload; shock: FOX 2.0 Performance Series Shocks. Front lift: 3 in (torsion key). Rear lift: 2 in (block). Clears tires up to 35 x 12.5. Recommended tire and wheel setups: 35 x 12.5 tires on 20 x 9 wheels with 5.75 in backspacing; 295/60 tires on 20 x 9 wheels with 5.75 in backspacing; 285/65 tires on 20 x 9 wheels with 6.18 in backspacing. Estimated installation time is 3-4 hrs, rated moderate. Installation notes: Disassembly/assembly of the factory torsion bar system requires the use of a special unloading tool. The GM specified tool #CH48809; Some minor trimming may be necessary to fit certain wheel/tire combination. This is normal with most aftermarket tire/wheel fitment on Chevy/GM trucks and typically consists of trimming the bottom edge of the inner fender shrouds and/or lower corner of front bumper valance. As a rule of thumb, deeper backspacing and shorter/ narrower tires will reduce/eliminate trimming required. Further trimming tips are included at the end of this instruction sheet; Stock wheels and stock tires can be installed, but depending upon alignment and tire profile will be tight to the ball joint cup. Wheel spacers may be required to use stock wheels and stock tires; Will NOT work with AT4X or ZR2 models, lower control arm profile is different; Dually models must select the "2 Inch Block Kit With Overload" option.

Features and Benefits:

• FOX 2.0 Performance Series shocks offer improved performance and damper capacity. Or FOX 2.5 PS IFP Performance Series shocks offer improved performance and damper capacity. Or FOX 2.5 performance elite series shocks offer next level performance and damper capacity. Aluminum body for faster heat dispersion and DSC adjustable reservoir
• Performance UCAs increase strength and allow for more suspension travel
• High strength cast torsion bar keys use an indexed design to provide additional ride height
• Sway bar relocation for proper clearance
• Differential relocation to improve CV operating angle
• Rear block and u-bolt kit provides lift while maintaining spring function and load capacity