USA Standard Gear ZDS9103 Drive Shaft

USA Standard Gear ZDS9103 Drive Shaft

USA Standard Gear
USAZDS9103
This is a SPECIAL ORDER part. This item can be brought in either with a stock order or on its own. Contact us today to discuss available options BEFORE ordering.
$795.32
$778.75
$795.32

Verify fitment with your vehicle
GO
Clear
 More payment options
USA Standard Gear ZDS9103 Drive Shaft

USA Standard Gear

USA Standard Gear ZDS9103 Drive Shaft

$778.75 $795.32
USA Standard Gear ZDS9103 Drive Shaft

USA Standard Gear

USA Standard Gear ZDS9103 Drive Shaft

$778.75 $795.32
Description
USA Standard Gear driveshafts are built new from the ground up; not remanufactured; to provide decades of everyday use. All driveshafts arrive fully assembled and ready to install to get your vehicle back on the road quickly.
Get the peace of mind and reliability of a brand-new driveshaft, don't settle for a remanufactured unit. Built fresh from the ground up, USA Standard Gear replacement driveshafts are constructed with high-grade steel, feature new slip yokes, and new maintenance-free u-joints to provide decades of carefree use. In some cases, USA Standard redesigns and strengthens the shaft to exceed factory specs, correcting common OE failure points. Further, all USA Standard driveshafts are precision balanced to eliminate vibration so your vehicle drives smooth. As part of USA Standard's "Perfect Fit" program, all driveshafts arrive fully assembled and ready to install so the vehicle will be back on the road quickly.
  • Brand New And Fully Assembled For Out Of The Box Replacement
  • Slip Yokes /U-Joints Are Lubricated With High Temperature Grease
  • USA Standard Driveshafts Are Strengthened Over Common OE Shafts
  • To Prevent OE Failure
  • All Units Are Dynamically Balanced At 3000+ RPM For Vibration
  • New Universal Joints; Slip Yokes Ensure A Long Life
  • Shafts And Components Ensure A Long Life
  • USA Standard Perfect Fit Drive Shafts Are Guaranteed For Proper
  • Fitment And Easy Installation

Application Summary:

Year Make/Model
1996-1999 Dodge Ram 2500
1996-1999 Dodge Ram 3500
Fitment
Year
Make
Model
Submodel
Engine
Notes
1996 - 1999
Dodge
Ram 2500
5.9L
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints, With NP241DHD transfer case, 7290 U-joint at differential, 1.125 in. cap diameter with inside snap rings
1996 - 1999
Dodge
Ram 2500
5.9L
Fits Dana 60 w/Disconnect Design; 29 1/8 in. Long
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
1996 - 1999
Dodge
Ram 2500
8.0L
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints, With NP241DHD transfer case, 7290 U-joint at differential, 1.125 in. cap diameter with inside snap rings
1996 - 1998
Dodge
Ram 2500
8.0L
Fits Dana 60 w/Disconnect Design; 29 1/8 in. Long
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
1999
Dodge
Ram 2500
8.0L
Fits Dana 60 w/Disconnect Design; 29 1/8 in. Long
NP241D-HD
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
1996 - 1997, 1999
Dodge
Ram 2500
Base
5.9L
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
Fits Dana 60 Front w/Disconnect Design; 29 1/8 in. Long;
1998
Dodge
Ram 2500
Base
8.0L
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
Fits Dana 60 Front w/Disconnect Design; 29 1/8 in. Long;
1996 - 1999
Dodge
Ram 3500
5.9L
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints, With NP241DHD transfer case, 7290 U-joint at differential, 1.125 in. cap diameter with inside snap rings
1996 - 1999
Dodge
Ram 3500
5.9L
Fits Dana 60 w/Disconnect Design; 29 1/8 in. Long
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
1996 - 1999
Dodge
Ram 3500
8.0L
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints, With NP241DHD transfer case, 7290 U-joint at differential, 1.125 in. cap diameter with inside snap rings
1996 - 1999
Dodge
Ram 3500
8.0L
Fits Dana 60 w/Disconnect Design; 29 1/8 in. Long
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
1999
Dodge
Ram 3500
Base
5.9L
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
Fits Dana 60 Front w/Disconnect Design; 29 1/8 in. Long;
1996 - 1999
Dodge
Ram 3500
Base
8.0L
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
Fits Dana 60 Front w/Disconnect Design; 29 1/8 in. Long;
2002
GMC
Sierra 2500
Base
5.9L
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
Fits Dana 60 Front w/Disconnect Design; 29 1/8 in. Long;
2007
GMC
Sierra 3500 HD
Base
5.9L
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
Fits Dana 60 Front w/Disconnect Design; 29 1/8 in. Long;
2007
GMC
Sierra 3500 HD
Base
8.0L
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
Fits Dana 60 Front w/Disconnect Design; 29 1/8 in. Long;
2018
Jeep
Wrangler JK
Base
5.9L
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
Fits Dana 60 Front w/Disconnect Design; 29 1/8 in. Long;
2018
Jeep
Wrangler JK
Base
8.0L
NP241D-HD
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
Fits Dana 60 Front w/Disconnect Design; 29 1/8 in. Long;
1987
Nissan
Pathfinder
Base
8.0L
Compressed Length 29-1/8 in. measured from center to center of the furthest U-Joints. With NP241DHD transfer case. 7290 U-joint at differential. 1.125 in. cap diameter with inside snap rings~Compressed Length of 29-1/8 in. mesured from centerline of U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end. With NP241DHD transfer case. 7290 U-joint at differential yoke. 1.125 in. cap diameter with inside snap rings
Fits Dana 60 Front w/Disconnect Design; 29 1/8 in. Long;
Read More
FAST EFFICIENT SHIPPING!

Through our distribution network Deliveries can be as fast as Next Day Delivery. Delivery times vary by destination, tracking information is provided with every purchase.
GET IT INSTALLED!

JB's Power Centre offers on-site professional installation services in Calgary and Edmonton, AB. We have on staff licensed Mechanical Technicians as well as MECP Certified 12-Volt Technicians.
* EXTEND YOUR PRODUCTS MANUFACTURER WARRANTY

All products include a manufacturer warranty, but you can extend this warranty with JB's Purchase Protection Plan.
*Available on select products.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)