CV-2 Grease survives severe temperature & pressure in wheel bearings, U-joints, & high-angle CV joints. It has organic moly, -100°F to 500°F operating temps, corrosion resistance, & synthetic fluidity that increases bearing life up to 200%.
Red Line CV-2 Grease is designed to withstand the extreme temperatures and pressures which occur in high-performance wheel bearings and CV-joints. The excellent high temperature stability, extreme-pressure protection and water resistance enables it to out-perform even the best conventional or synthetic greases. Red Line CV-2 Grease can be used in a wide range of applications at temperatures ranging between -100°F to 500°F and provides good oxidation and corrosion resistance, low evaporation, oil separation and has a minimum effect on rubber seals. The exceptional extreme-pressure performance and the fluidity of the synthetic oil allows increases in bearing life of 200% to 800%. Red Line CV-2 Grease contains a red moly compound which is a superior lubricant to black moly disulfide lubricants. Red Line CV-2 Grease may also be used in industrial applications such as high-temperature alternator bearings, high-speed ball bearings, conveyor bearings, worm gear drives, servo mechanisms and applications where vibrations can cause fretting wear and corrosion to take place. Red Line CV-2 Grease will retain its consistency and extreme-pressure performance under high-temperature and high-shear conditions for extended periods, which extends the performance ranges of the lubricated components. Red Line CV-2 will slightly darken after high-temperature use; this darkening will not detrimentally affect the performance of the grease. Although Red Line CV-2 is compatible with small amounts of many petroleum-based greases, it is always good lubrication practice to thoroughly clean out the old grease to eliminate abrasive particles and to minimize the possibility of grease incompatibility.
- High-temp stability
- 200% more bearing life
- Darkens after high-temp use
- Pressure protection
- Water/Oxidation/Corrosion resistance
- -100°F-500°F operating temp
- Low evaporation
- Organic Moly
- High temp/speed equipment
- Synthetic fluidity
