BluePrint Engines 383 ci Small Block GM style drop in ready Engine - dressed longblock w/ carb BP38318CTC1DK

BPEBP38318CTC1DK
Heads up — this is a Special Order item. We don't carry it on the shelf, but we can bring it in for you! Lead times vary and can be 10 weeks or more depending on the manufacturer. Give us a call or send us a message so we can check current availability and walk you through your options before you commit to an order. Note: If you place an order without consulting with us for this product, the shipping information selected at Checkout does not represent the time it takes to get the product from the manufacturer.
$16,775.88
$14,948.62
$16,775.88

<p>Earn%20[points_amount]%20when%20completing%20this%20purchase.</p>
BluePrint Engines 383 ci Small Block GM style drop in ready Engine - dressed longblock w/ carb BP38318CTC1DK

Vendor: BluePrint Engines

BluePrint Engines 383 ci Small Block GM style drop in ready Engine - dressed longblock w/ carb BP38318CTC1DK

$14,948.62 $16,775.88

Vendor: BluePrint Engines

BluePrint Engines 383 ci Small Block GM style drop in ready Engine - dressed longblock w/ carb BP38318CTC1DK

$14,948.62 $16,775.88

BluePrint Engines 383 Crate Engine 436 HP GM Small Block

SKU: BP38318CTC1DK

Horsepower & Torque: 436 Horsepower / 443 ft. lbs. Torque

Cylinder Heads: BluePrint Engines Aluminum Cylinder Heads

Compression Ratio: 10:1

Camshaft: Hydraulic Roller Cam - .544 Intake / .555 Exhaust Lift and 230 Intake / 236 Exhaust Duration @ .050 - 110° LSA

Pistons: Hypereutectic

Crankshaft: Cast Crank - 3.750" Stroke and 5.700" Rods

Fuel Recommendation: 91+ Octane

Description:

  • Horsepower & Torque: 436 Horsepower / 443 ft. lbs. Torque 
  • Compression Ratio: 10.0:1
  • BluePrint Engines Aluminum Heads
  • BluePrint Engines Hydraulic Roller Cam
  • BluePrint Engines Cast Crankshaft
  • BluePrint Engines Hypereutectic Pistons

Block:

  • BluePrint Engines High Strength Cast Iron Block
  • Manufactured and Machined in the USA!
  • Drilled and Tapped for Clutch Linkage
  • Mech Fuel Pump Provision: Yes
  • Passenger Side Dipstick
  • 1-Piece Rear Main Seal
  • 4-Bolt Main
  • 4.000" Bore

Rotating Assembly:

  • Cast Crankshaft
  • 3.750" Stroke
  • OEM Type 5.700" Connecting Rods w/ 150,000 PSI Bolts
  • Hypereutectic Pistons
  • Externally Balanced Front and Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads
  • 64cc Chamber
  • 2.02" Intake / 1.60" Exhaust Valves
  • 195cc Intake / 75cc Exhaust Runners

Cam Specs:

  • Hydraulic Roller
  • .544 Intake / .555 Exhaust Lift
  • 230 Intake / 236 Exhaust Duration
  • @ .050-110 Degree Lobe Separation

Ignition Timing:

  • 34 Degrees Total at 3500 RPM

Also Includes:

  • Black Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump
  • Holley Classic 750cfm Vacuum Secondary Carburetor w/ Manual Choke
  • Aluminum Intake Manifold
  • Thermostat and Thermostat Housing
  • Mechanical Fuel Pump
  • HEI Distributor
  • Valve Covers
  • Spark Plugs and Wires
  • Harmonic Balancer
  • Timing Cover
  • Oil Pan

Notes:

  • This engine features a true 4-inch bore, which mathematically yields 377 CID with a 3.75-inch stroke.
  • Front Accessory Drive does NOT fit Corvette
  • The front accessory drive on this engine fits many vehicles; however, it is the customer's responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
  • Not for use in pollution-controlled vehicles.
  • The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.